Solid Wood
Imported from the Americas, available in 6 popular woods: birch, cherry, alder, oak, ash and walnut. It is a true hardwood with a natural, rich, clear wood grain with a stunning linear texture.
High Scratch Resistance: Excellent flexural strength and strength.
Good processability: smooth section and adhesive properties.
No deformation or rupture: moisture content 8~12%.
Good water resistance: semi-gloss PU paint on the front and matt paint on the back.
Mature and stable, people who prefer classical European style.
Paint
Core MDF 18/21/25mm thick, available in matt or glossy finish.
Avoid discoloration: Superior resistance to yellowing and excellent weatherability.
Eco-friendly: Paint from DAIHO, silver powder can be added for a metallic finish.
Excellent scratch resistance: hardness up to 1.8.
People who like fashion and like all kinds of bright colors.
Fireproof board (veneer)
Core particleboard or MDF: 18mm thick, with edges sealed with 2mm thick PVC. The surface has a layer of finish, which is green and environmentally friendly.
High scratch resistance: abrasion resistance, high temperature resistance, scratch resistance, penetration resistance.
Delicate touch: the surface is flat and smooth, can be used for clear and thorough patterns, the effect is realistic, and the three-dimensional sense is strong.
Economical people and people who like a variety of bright colors.
Wooden Veneer
Core MDF or plywood 18/21/25mm thick, available in matt or glossy finish.available in 6 popular woods: birch, cherry, alder, oak, ash and walnut.Veneer can be made by natural wood Or man made veneer
Core plywood or MDF: 18mm thick, with edges sealed with 2mm thick PVC. The surface has a layer of finish, which is green and environmentally friendly.
Make vanish painting .
Luxury Desgin , but price is more affordable than solid wood , but it is natural looking .
Acrylic Fiber
Core MDF/Particleboard/plywood : 18 thick, edges sealed with tonal acrylic. Front and back: The front is painted with ink acrylic and the back is the same as the front, or laminated with ABS decorative paper.
Easy Care: Long-term use and easy to clean.
Scratch Resistant: Excellent alternative to lacquer.
Enthusiastic and lively, people who like bright colors.
Pet Panels
Pet door panel is made of polyester material as the basis of high temperature production, and then through different caliber grinding tools extrusion, and the formation of different thickness of the plate. Its main components include: polyethylene terephthalate PET and polybutylene terephthalate PBT resin.
Weight: 1.39 g/cm3
Temperature resistance (continuous) : 115°C
Temperature resistance (short time) : 160°C
Linear thermal expansion coefficient (23-100°C average) : 60×10-6m/(M.k)
Flammability (UL94) : HB
Water absorption (23°C: Soaking in water: 24 hours)6%
Bending tensile stress: 90MPa
Tensile strain at fracture: 15%
Tensile elastic modulus: 3700MPa
-1% : /2% compressive stress under normal strain: 26/51mpa
Pendulum notch impact test: 2kJ/m2
The strength and hardness of the PET board are very high, the sliding performance and wear resistance are very good, the electrical insulation performance is also very good, but also has a good creep resistance, so as to stabilize the friction coefficient. PET plate weather resistance, chemical resistance, good stability, low water absorption, weak acid resistance, machine solvent resistance, but not heat resistant water immersion, alkali resistance, and can not use common epoxy resin AB glue for bonding.
Pvc Foil Coating
Core MDF: 18/21/25mm thick, seamless frame and core construction. Front and back: PVC on the front and white melamine on the back.
High Quality: Mainly supplied by Renolit and Riken PVC foil with JOWAT eco-friendly glue.
Delicate and beautiful wood grain: tough surface, strong scratch resistance, can replace real wood.
Romantic and elegant people and people who like fresh pastoral style and simple European style.
High Pressure Laminate
The core particleboard is 18mm thick and the edges are sealed with 2mm thick REHAU PVC.
Scratch resistance: the thickness of decorative paper is 0.6~0.8mm.
Easy Care: Long-term use and easy to clean.
Excellent scratch and heat resistance: always fresh.
Mature people and people who like bright colors.
Melamine
Core particleboard: 18mm thick, edges sealed with 2mm thick REHAU PVC. Front and back: Both sides are coated with high quality impregnated decorative paper.
Delicate texture: Available in natural or single color.
High Quality: Scratch Resistant, Easy Care.
Budget-conscious homeowners and those who prefer a modern minimalist style.
Aluminum Frame Glass Door
Core glass: 5mm thick, the four corners of the aluminum alloy frame are connected with iron corners.
Lightweight and high strength.
High Quality: Corrosion resistant, easy to clean.
Young and energetic people and people who like minimalist luxury style.
